install prosafe plus utility download for mac

You are going to be prompted immediately to update the bootloader. Open a web browser and enter the IP address of the GSS116E into the address bar and log in to the switch management GUI. Wait at least 1 minute for the reboot to complete. Once the new firmware is successfully loaded (onto the switch), your GSS116E will automatically reboot itself.

The upgrade process typically takes about three minutes. When the upgrade is complete, your switch restarts.

The update may take several minutes even though you may not see any activity on the screen. Do not disconnect the Ethernet cable or power off the unit until the process is complete. Do not interrupt the network connection while in progress. Click the BROWSE button to locate and select the firmware file on your PC. Select System > Maintenance > Firmware Upgrade. When prompted, enter the password for the GSS116E switch in the password field. Select the GSS116E switch that you want to upgrade the firmware on. The configuration home page displays a list of Web Managed (Plus) Switches on the network. Double-click the ProSAFE Plus Utility icon. Connect your computer to the same network as your GSS116E switch. Decompress and install the ProSAFE Plus Utility. Download NETGEAR GSS116E Switch Configuration Utility. Download the new firmware and unzip it to the file to extract the switch firmware image. Invalid combinations of IP and mask are accepted with access control list Changes the Switch Management Mode (System > Management > Switch Management Mode) default value from Web browser and Plus Utility to Web browser only. To comply with California state law, this new firmware requires you to change the default password after using it access the local browser UI.

Install prosafe plus utility download for mac